Product name:Plastic Tool Steel P20
Thickness:1.2-600 mm
Width::1220-4200 mm
Length:5000-18000 mm
Notes:coil thickness ≤ 25 mm
[email protected]                   Contact Us


  Details:

P20 Steel Plate | 1.2311 | 3Cr2Mo | Plastic Mold Tool Steel

AISI P20 Steel Plate Material is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The special purpose mold steel P20 steel plate is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc.

P20 Tool Steel| Plastic Mould Steel P20 | Die Block P20

P20 is the Pre Hardened Plastic mould steel hardness distributed evenly in large cross sections that have excellent weldability with least hardness elevation, good mirror polishability and less streak texture making finishing easier.

P-20 - Diehl Tool Steel - Specialty Metal Distributors

P-20 is mold quality alloy steel supplied in the prehardened condition. Special melting and refining practices are utilized to produce a uniform product with exceptional cleanliness. These characteristics allow P-20 to be polished to an extremely high finish required for plastic molding.

Plastic Mold Steel - Otai Special Steel

AISI P20 Steel Plate Material is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The special purpose mold steel P20 steel plate is commonly used for plastic injection mold cavities and tooling.

High Speed Steel | Tool Steel | P20 Mold Steel | P20

P20 Mold Steel is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The steel is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc.

P20 tool steel chemical composition,mechanical, Physical ...

P20 Tool Steel is described as a chrome-moly alloy steel, with a carbon content of approximately 0.35 to 0.40. Over time, many variations on basic P20 tool steel …

1.2311 steel plate | P20 | 3Cr2Mo Plastic tool steel ...

1.2311 tool steel is a mould materials for plastic injection, it belong to the high quality medium carbon,Pre-hardness(28~34HRc), Cold work plastic mould steel. It no need further heat treatment. so you don’t have any worry about distortion or cracking. 2311 steel is most widely used to plastic mold material in injection plastic mould.

P20+S Steel - Kohli Iron & Steel Store

P20+S is a plastic mould tool steel,P20 with higher sulphur content(0.30-0.50),thus improves machinability.It is delivered in pre-hardened condition.It is a high strength steel.

Plastic Mould Steel - Saaj Steels Corporation | Plastic ...

P20+S is a high tensile alloy tool steel grade supplied in the hardened and tempered condition. With its higher sulphur content it offer better machinability than P20 plastic mould tool steel grade.Heat the P20S component slowly, allow sufficient time for the steel to become heated through.

Plastic Tool Steel P20, Plastic Tool Steel P20 Suppliers ...

Plastic tool steel p20 products are most popular in North America, Northern Europe, and Southeast Asia. You can ensure product safety by selecting from certified suppliers, including 1,475 with ISO9001, 237 with Other, and 23 with ISO14001 certification.

P20,1.2311,P20 plastic mold steel,plastic mold steel,tool ...

P20 is an alloy tool steel which offers good machineability even in the hardened and tempered (Brinell 300) condition. This steel gives an excellent polished finish and is one of the most widely accepted specifications for machine cut plastic moulds and casting dies.

P20S P20+S Tool Steel - Special steel china supplier-OTAI ...

Tool steel P20 + S is suitable for mold production, improve the machining performance is required. Typical applications include support and injection mould, mould holders and zinc die casting mould. P20S is a versatile plastic mold and the characteristics of high strength steel is applicable to many other applications, such as axis and wear a belt

P20 Tool Steel - West Yorkshire Steel - Only £25 UK ...

P20 tool steel is ideally suited for the production of plastic moulds. Typical applications include die holders, zinc die casting dies, backers, bolsters and injection moulds. The versatility of P20 tool steel with its high tensile characteristics enables uses for a variety of …

H-13, P-20, 420ss - Alloy Tool Steel Inc.

P-20 is used for plastic injection and compression molds, and zinc die casting dies. Molds from this material can be made and placed directly into service. P-20 has a machinability rating of 65% of a 1% carbon tool steel.

P20 Plastic Tool Steel, P20 Plastic Tool Steel Suppliers ...

alibaba› …› steel› tool steelP20 Plastic Tool Steel, Wholesale Various High Quality P20 Plastic Tool Steel Products from Global P20 Plastic Tool Steel Suppliers and P20 Plastic Tool Steel Factory,Importer,Exporter at …

Plastic Mold Steel | DAIDO STEEL

Tool steel is ranked among our major products and we have a wide variety of products for cold work tool steels, hot work tool steels, high-speed tool steels, and plastic mold steels.

Plastic Mould Tool Steels - ssm.co.nz

Right choice of tool materials for plastic moulding tools, should achieve: High surface finish . Corrosion resistance ; ... P20+Ni. 1.2738. ... High performance plastic mould steel with …

Plastic Mold Steels - P20 Mold Steel Manufacturer from …

Plastic Mold Steels Our range of products include p20 mold steel, 1.2083 mold steel, 1.2311 mold steel, 1.2312 mold steel, 1.2738 mold steel and 1.2316 mold steel.

AISI P20 Plastic Mould Steel | AISI P20 Tool Steel | Die ...

AISI P20 is the Pre Hardened Plastic mould steel hardness distributed evenly in large cross sections that have excellent weldability with least hardness elevation, good mirror polishability and less streak texture making finishing easier.

Plastic Mold Steel - Tool Steel-High Speed Steel China ...

AISI/ SAE P20 Steel is a typical Plastic products tool steel, which usually used in applicable to the front of the TV shell, telephone, water machine, vacuum cleaner and other plastic mold and die set. Thermoplastic plastic injection mould, extrusion die, Etc.

Did You Choose The Wrong Injection Mold Tool Steel

Typically plastic injection molds are manufactured from either heat-treated tool steel or pre-hardened steel. Other materials include aluminum and epoxy-like …[PDF]

TOOL STEEL - P20 PLASTIC MOULD STEEL - Global …

DISCLAIMER: This specification is for information purposes only. Global Metals takes no responsibility for the suitability of the steels referred to in this specification without prior

P20 Tool Steel (40CrMnNiMo8-6-4) | Interlloy | Engineering ...

P20 Tool Steel (40CrMnNiMo8-6-4) P20 is a plastic mould steel that is usually supplied in a hardened and tempered condition. Exhibiting good machinability with better polishability, compared to 1.2312 (AISI P20…

Heat Treating Tool Steel For Injection Molding

Heat Treating Tool Steel - How To Choose The Right Treatment For Injection Molds. Heat treating tool steel is a very complicated task. Choosing the right type of heat treatment in plastic injection mold making can also be very difficult if you don’t have the knowledge.

P20 Tool Steel - Low-Carbon Mold Steel UNS T51620

Low-carbon mold steels or group P steels are of different types that include P2, P3, P4, P5, P6, P20, and P21 steels. Chromium and nickel are the main alloying elements found in group P steels. P20 tool steels are nitrided or carburized. These steels are capable of being machined into complex and ...[PDF]

UDDEHOLM TOOL STEELS FOR PLASTIC MOULDING

UDDEHOLM TOOL STEELS FOR PLASTIC MOULDING. ... Selecting a tool steel supplier is a key decision for all parties, including the tool ... MOULD AND HOLDER STEEL Uddeholm Impax Supreme (AISI P20 modified), which is refined by the vacuum degassing technique, offers good machinability and

Steel grades | The Tool Hub

than normal AISI P20 tool steels. Suitable for plastic molding of PA,POM, PS, PE, PP, ABS with the requirement of high hardness, polishability and wear resistance.

Die & Tool Steel - Die Steel Manufacturer from Mumbai

Manufacturer of Die & Tool Steel - Die Steel, D2 Die Tool Steel Flats, O1 Tool Steel Rounds & Flats and D2 Die Steel offered by Suman Metalloys, Mumbai, Maharashtra. ... Plastic Mould Steel P20 1.2738 Flats. Get Best Quote. Approx. Price: Rs 100 / Kilogram Get Latest Price. Product Details:

  Related Products :

7 inch steel pipe 4130 steel tub

Plastic Tool Steel P20

p11 seamless steel pipe

alloy wheels for sale